Skip to content
Get App

SteamDeck (Windows, SteamOS & Secure Boot Install Guide)

Step-by-step guide to factory resetting and reinstalling SteamOS on a Steam Deck via USB, plus installing Windows 11 with Rufus and enabling Secure Boot and TPM for compatibility.

Key Takeaways

  • SteamOS can be factory reset or reinstalled cleanly from a USB stick using Rufus or Balena Etcher.
  • Windows 11 can be installed on a Steam Deck with a Rufus-made USB, using auto-unattend options to bypass hardware and account requirements.
  • Driver installation and display scaling configuration are necessary after a Windows install to get the Steam Deck working properly.
  • Secure Boot and TPM settings matter for certain games and can be adjusted during setup.

What the video covers

  • Explains how to factory reset the Steam Deck through the Steam menu's system settings.
  • Shows how to reinstall SteamOS by downloading the official image and flashing it to a USB stick with Balena Etcher on Linux or Rufus on Windows.
  • Covers setting a user password in SteamOS so the USB flashing step can proceed.
  • Demonstrates booting the Steam Deck from USB using the volume-plus and power button combination and the boot manager.
  • Walks through installing SteamOS from the USB stick with the wipe-and-install option.
  • Describes creating a Windows 11 USB installer with Rufus, including the auto-unattend options for skipping requirements and online account setup.
  • Shows the Windows installation process on the Steam Deck, including partition caution and selecting the correct drive.
  • Covers installing Windows drivers from the AMD/APU and Steam Deck driver packages, with notes on driver date matching and unsigned LCD audio driver workarounds.
  • Explains display and GPU scaling adjustments, including resolution and refresh rate tweaks.
  • Ends with booting back into the USB device and notes on returning to Steam OS or disabling Secure Boot.

Answers

Questions about this video

How do I factory reset my Steam Deck?

Go to the Steam menu, then Settings, then System, scroll down and select Reset to Factory State. Keep both options checked (clear user data and reinstall SteamOS) and confirm.

What tools are needed to create a SteamOS or Windows USB installer?

On Linux, the video uses Balena Etcher; on Windows, it uses the portable 64-bit version of Rufus. A USB stick and optionally a mouse, keyboard, and dock or USB-C adapter are recommended.

Why does the Windows installer on Rufus offer to create an auto-unattend file?

It lets you skip RAM, Secure Boot, and TPM requirements, avoid the online Microsoft account, disable data collection, and turn off BitLocker. The presenter says this saves time and eases setup.

Full Transcript — Download SRT & Markdown

00:00
Speaker A
This video is mainly for the Steam Deck, but it will cover other devices as well.
00:04
Speaker A
We'll show you how to factory reset Steam OS. We'll show you how to reinstall Steam OS with a USB stick.
00:09
Speaker A
I'll show you how to install Windows 11 with a USB stick. And I'll show you how to enable secure boot and TPM so you can play those funky games with Andy Cheet on your Steam Deck. We will need a USB
00:18
Speaker A
stick. To make life easier, it would be nice to have a mouse and keyboard. And to make life even easier, it'd be nice to have some kind of a docking station or a USBC to USB cable to allow us to
00:28
Speaker A
use mouse and keyboard and our USB stick on the Steam Deck. To factory reset your Steam Deck, easy. Go to Steam menu. Go to settings. Go to system. Scroll down.
00:36
Speaker A
Click on reset to factory state. Factory reset. Then you can keep both of these checked. Clear user data and configuration. Reinstall Steam OS.
00:43
Speaker A
Confirm. To reinstall Steam OS on the Steam Deck with a USB stick, go to Steam menu. Go to power. Click on switch to desktop. Now you're on the desktop.
00:50
Speaker A
Click on the start menu. Go to discover. Click on Firefox and install a web browser. In your web browser, search install Steam OS. If this website doesn't come up, I'll link it in the description. You scroll down here. We've
01:00
Speaker A
got a couple of options. On Linux, we want to use Valiner Etcher. And on Windows, we're going to use a Rufus utility. Let's download the ISO first.
01:06
Speaker A
We're obviously on a Steam Deck, so we need to click this one here. Download the image. Steam OS image for deck machine PC. We'll click on that. We'll scroll down. We'll agree to the license terms and download Steam OS image. While
01:17
Speaker A
that's downloading, we'll go back and we'll go and get Alan Etcher so we can burn that image to the USB stick. We'll press continue to external site and we'll click download Etcher. At the bottom, you'll see Etcher for Linux
01:27
Speaker A
64-bit. Click on that download link. There's downloaded. Let's click to open the file explorer to your downloads folder. If you can't find that, simply click on Dolphin and go to downloads on the left. Right click Beta Etcher or go
01:39
Speaker A
down here to extract and extract here. When that's finished, open the folder. See Balliner Etcher right there. Double click on it. Then press launch. Click on flash from file. Click on your downloads folder. Click on the Steam Deck image.
01:50
Speaker A
It's called Steam Deck OB repair for me at least when I downloaded it. Click on that and press open. Now we have to plug in our USB stick. USB stick is in. Click select target. It's found a USB stick
01:59
Speaker A
there. So you can just click on that and press select one and hit flash. If it comes up asking for a password, just press cancel. Cancel again. You'll need to set a password within Steam OS. So click on the start menu. Go to system
02:10
Speaker A
settings. Scroll all the way down to the bottom on the left. Click on users.
02:13
Speaker A
That'll be you as a user. Click change password and set your password here. If you selected target after canceling it after the password, you can just unplug a USB stick and plug it back in and it will show up. Going to go back to select
02:25
Speaker A
target. Select one. Hit flash. And now I'll enter my password and I'll press okay. Mine failed as I didn't put the password in properly. So I had to unplug, replug the USB stick. Select the USB stick. Hit flash. Enter the password
02:36
Speaker A
quickly. Seems like there's a timeout in that. And then press okay. That's how to do it on Steam OS. What if you wanted to do this on Windows instead with a USB stick? our Windows machine. We'd plug in
02:45
Speaker A
our USB stick on the same website. We do the same thing again. We go down here.
02:49
Speaker A
We would download the um ISO image. We come back here and this time we would get Rufus to do it to external site.
02:54
Speaker A
This is Rufus. You can just get the portable version. Get the 64-bit Windows portable version. That one there. When that's done, go to your downloads folder. In your downloads folder, you may need to rightclick Rufus. Go properties and unblock file. Then okay.
03:06
Speaker A
Then run Rufus as administrator by right-clicking and pressing run as administrator. Then just press no for the updates. Select your USB stick here.
03:14
Speaker A
So, it's picked it up. My USB stick has no label E. Select the ISO or disk image. So, hit select here. Go to your downloads folder. It's called Steam OB repair. At least for me at the moment when I downloaded it. Press open. Rest
03:25
Speaker A
of the settings should be fine. Just hit start and then press okay and press okay again. When that's finished, make sure you plug your USB into the Steam Deck or the dock. Once you've done that, I want you to do a hard power off if you can.
03:36
Speaker A
So, ideally, probably hold the power button down for a full like 16 seconds just to make sure it's turned off. So that'll be this one here. Now that it's off, I want you to hold the volume plus button down, then press the on button
03:47
Speaker A
once. Keep holding the plus button down. So what that would look like, hold the plus button down, press the power button on once, keep holding the plus button down until you see a screen. We should see a buyer screen. We're in the buy
03:57
Speaker A
screen. I'm going to use my keyboard to just make life easier. Press the right arrow key to go to boot manager, then press enter. The boot manager order. On the top, I've got my existing OS. We want to go down to EFI USB device. So I
04:08
Speaker A
press down twice, then press enter. All right, we've booted to the USB stick. We need to double click on wipe device and install Steam OS. So, double click on that and just press proceed.
04:22
Speaker A
Once that's done, go ahead and press proceed. Now, you should see the setup screen and you can set up everything fresh. That's how to reinstall Steam OS on your Steam Deck. Now, to install Windows on the Steam Deck, go to a web
04:32
Speaker A
browser, search Windows 11 download, click on download Windows 11. That's the official website. Two ways you can do it. If you want to do it the way we did it with the Steam OS, you can scroll down and download the ISO this way. And
04:42
Speaker A
if you're on Windows, you could use Rufus or if you're on um Linux, you could use Valina. Alternatively, you could use the create Windows 11 installation media, which is the media creation tool. Although that will bug out if you're using the same USB stick
04:56
Speaker A
that you made with Steam OS. It just doesn't recognize it for some reason. So, for that reason and also to save time, I'm just going to make the USB stick on Windows and and I'm going to use the ISO and I'm going to use Rufus.
05:07
Speaker A
So, I'm going to download the ISO here. Just going to select English, United States. Select whatever you like and hit 64-bit download. So, that'll download the ISO file and also I'm going to go ahead and grab a fresh Rufus. So, I'll
05:17
Speaker A
scroll down here. I'll get the portable 64-bit right there. I'll open up Rufus and I'll hit no. Then I'll select the USB, which is E at the moment for me.
05:25
Speaker A
Then I'll select the ISO image. That'll be in downloads. There's the Windows 11 ISO. Press open. Default should be fine.
05:31
Speaker A
Just hit start. It'll bring up something about you making auto unattend. And I've done that in some of my videos before, but uh for ease of use and to save time, we will use this auto attend that Professor can make for us. So, I would
05:43
Speaker A
recommend removing the requirement for 4 gig of RAM, secure boot, and TPM. That's pretty useful. Remove the requirement for an online Microsoft account. We might as well just set our name. I'm just going to set it to PC. That's going
05:54
Speaker A
to be the name of the username. And it looks like when you set that, it gets rid of the removing online Microsoft account because it's forcing a local account. I would click disable data collection, skip privacy questions, and
06:04
Speaker A
then disable Bit Locker, especially if you want to install Pro like me. Uh it'll force Bit Locker on. So click that. Press that. We just leave, and it'll take care of um everything else with scripts that I'm going to show you
06:14
Speaker A
later. I'm going to run Windox through the Windows and just press okay. Then press okay. And then press okay. Now that's done. We'll hit close. If you're curious on the auto unattended file in the USB stick, it's in sources OEM at
06:25
Speaker A
panther unattend. Here it is there. Bypassing TPM, secure boot check, RAM check. Also setting a name to PC. Now, we're not entirely done yet. We do need drivers for the Steam Deck because there are a lot of things that won't work
06:36
Speaker A
within Windows that Windows don't have a driver baked in for on features that Steam Deck has. I want you to Google Steam Deck drivers Windows. Should be the first one that comes up hopefully.
06:46
Speaker A
If you scroll down here, make sure you select the right drivers for the right device. We've got Steam Deck OLED and Steam Deck LCD. I'm using an LCD at the moment. We need to go ahead and grab all
06:54
Speaker A
these drivers. I'm going to grab APU driver for the graphics. Just press continue to external site. That's downloaded. I'm going to go a bit above and beyond and I'm going to name the folders just so I know what they are.
07:06
Speaker A
So, I'm going to hit extract just with the default Windows extraction option. Weirdly enough, in the folder, it comes with some other drivers as well. I'd assume therefore if you didn't want to actually install the the full full
07:16
Speaker A
driver. I'm just going to grab that one there. That's the only one that I need.
07:19
Speaker A
And I'm just going to neatly and cleanly name things. You guys don't have to do this if you don't want. I just want to keep tabs of everything that's going on.
07:26
Speaker A
I'm going to go and download the rest of the drivers. And I'm going to name them.
07:29
Speaker A
All right. Gets a little confusing, but I'll help you when we're actually installing these drivers on our new install. The AP driver, the graphics driver, you just run setup xc. The Wi-Fi driver, we just run install.bat. But we
07:39
Speaker A
don't have to do that. We could just run setup if we wanted to or install orbback Bluetooth driver. It says to run um install driver cmd. So that'll be that one. The SD card reader just has a setup. The audio drivers, it actually
07:51
Speaker A
tells us to rightclick the INF file and go install. That's how we would do those audio drivers there. Right click and install. So these drivers won't come with Windows updates and we need to install them otherwise those devices
08:02
Speaker A
will not work. Not quite done. Also, the graphics driver does not come with a control panel, which is just stupid because all that the control panel does is just change your registry keys. To fix that, you need to download the
08:13
Speaker A
driver closest to the date or slightly after the date. Here I have LCD and the OLED drivers and they're completely different. This is the OLED drivers. If I go in packages, drivers display that folder and check the INF file here. This
08:27
Speaker A
driver came out on June of 2024. So, if I was looking for a driver, I'd want to try to get a driver the closest to that date. Now, in theory, you think that would work, but it actually requires the
08:37
Speaker A
driver after that because certain control panel is only compatible with a certain driver. Control panel for the LCD display. Those are really complicated. This would be the 9th of 2023. So, September of 2023. That comes as 23.9.2 or 23.9.3. But that didn't
08:52
Speaker A
work for me. What worked for me was 23.9.1. So, I wanted to point you guys the right direction like this to show you that if Valve come out with newer drivers in the future for this for Windows on how to point you in the right
09:05
Speaker A
direction and how to get the control panel working for that driver in the future just in case this video gets used in the future for something like that.
09:11
Speaker A
I'll make it easy for you and the links will be in the description. If you're on the OLED driver to get the control panel, you're going to need 24.7.1 and that'll be in the description. Download driver itself to get the control panel.
09:23
Speaker A
And if you're on the LCD, you'll need to grab 23.9.1. And like I said, links will be in the description. And you would just go ahead and you would download that there. All right. So, I've downloaded both because
09:34
Speaker A
I also have a OLED and an LCD version. Now, it's the same process for both. So, I'll just show one. You've got sevenzip installed. Right click the driver and go ex. You should see a seven-zip little icon menu. Go extract here or extract
09:47
Speaker A
file. I just did extract here. Then you need to go to packages, drivers, display, that folder there. At the very bottom, there will be a folder with numbers. You've got to go into this one here. Then you need to scroll all the
09:57
Speaker A
way down and look for ccc2_install.exe. That's the installation for the AMD control panel, but it needs to kind of be compatible with driver. Grab this file because we're going to need it. Pro tip, if you've installed the driver on
10:10
Speaker A
the OS, I know we haven't gotten to that point, but just letting you know now. If you've installed the driver on the OS and you install the wrong control panel, you open it up and it says this control
10:18
Speaker A
panel is not compatible with this driver. Use DDU to wipe everything and start again because trust me, you can't just uninstall the control panel then try to install another one and expect it to work. It won't. All right, we've got
10:28
Speaker A
this file ready to go. Yeah, I'll paste it in the AP driver. Why not? Put it there. So now we're all ready to go and we've got all the drivers that we need.
10:34
Speaker A
But what I would do at this point is I would copy this to our USB stick. So I'm going to do that now. Going to copy this simply to our USB stick. USB stick is done. We'll unplug the USB stick from
10:42
Speaker A
this PC. We'll put it into our Steam Deck, whether it be using a cable or a docking station or something like that.
10:48
Speaker A
Then we'll get into this Steam Deck BIOS by holding the plus button down while the piece while the deck is off and then pressing the power button once. In the Simsex Bios, I'm going to use my keyboard to make life easier. I'm going
10:57
Speaker A
to press the right arrow key and press enter on boot manager. In the boot manager here, I'm going to go ahead and press the down arrow key twice to select EFI USB device and press enter. Now, it should boot to our Windows bootable
11:07
Speaker A
media we've made. We'll hit next here. Hit next again. Just hit install Windows 11. I agree. Everything will be deleted, including files, apps, and settings.
11:17
Speaker A
Just press I don't have a product key. I'd highly recommend Pro, especially if you wanted to get into stuff like blocking updates and blocking drivers with policies. Press accept.
11:29
Speaker A
At least on my device, the Steam Deck created eight partitions by the looks of things. Um, so make sure you don't click on the USB or anything like that. This one for me is the USB stick. It's not
11:40
Speaker A
letting us delete that either, which is great. What we want to do here is we want to delete every single partition that Steam OS created. So, I'm going to click on all of them. Start with the first one. The second one I'll delete
11:52
Speaker A
it. Second, and I'll just keep going and deleting everything that says dis zero basically until everything all the partitions are wiped entirely. It's still sewing that because that's just unallocated space. I'm going to delete all the partitions that are assigned to
12:06
Speaker A
disk zero. And there it is. There we've completely wiped the drive that's on the Steam Deck. And this is basically our USB stick. So we want to click on the drive that we've completely wiped. And then we press next
12:19
Speaker A
and go ahead and hit install. Here we are in the OB. Press yes. Just press yes and then skip. I'm quite frustrated. Bruofus is supposed to bypass Microsoft trying to force a Microsoft account. Clearly doesn't work with 26H2 which is why I usually prefer
12:41
Speaker A
to use my own autoattended which I have in my ultimate guide on GitHub but there's still a way to bypass this. Um, press left shift and F10 together.
12:49
Speaker A
Should bring up a command prompt window. Click on the command prompt window. Type O ob/bypass nro and then press enter. That'll stop us from being forced to use a Microsoft account and we can use a local account.
13:03
Speaker A
Shouldn't force us now. So, we just go through the same steps again. Now, press I don't have internet.
13:11
Speaker A
Now, we're into Windows on the Steam Deck. Steam Deck is literally in the wrong mode. You may need to go into the system display settings and and change the display orientation landscape that you need to set it to if the Steam Deck
13:24
Speaker A
isn't in the correct aspect ratio and you've kind of got it top to bottom. I want to install my drivers last after I've done some optimizations and wind sucks to the device. So, I'm going to connect my internet now. Going to go to
13:35
Speaker A
Edge. Press start without your data. I'm going to get rid of all this anyway. I'm going to uninstall Edge. I'm going to search free GitHub. going to run Windox through this because Windows just sucks out of the box and Windox will do
13:46
Speaker A
everything for us. What I'm going to do, I'm going to search scripts. Click on that. I'll allow Windows to let me use scripts. Going to click on this. Going to type PowerShell. Make sure PowerShell is running as administrator. I'm going
13:56
Speaker A
to paste the code here in um PowerShell. I'm going to press enter. This will just run Windox and just get Windows in a usable state.
14:05
Speaker A
This looks like a new 26H2 thing. I'm just going to press cancel. Looks like it's going to try to force me to put a password in. See if we can get around without putting one in. There we go. Let
14:13
Speaker A
me put just no password in. Wind sucks to take care of most things. I recommend going to your settings, going to time and region, time and language, going to date and time. Change your time to your time zone. I'm in this
14:29
Speaker A
part of the world. Hit sync. Now, also because you're on the deck, I'd recommend hitting time and language.
14:33
Speaker A
Typing. Open touch keyboard. Click on show the touch keyboard. Click always. I'm also going to activate my Windows Google Maps Gravel. I can't show it on here. This is how I like to set up Helium.
14:46
Speaker A
I'm activated. Let's install our drivers. Go to the file explorer. We'll go to our USB stick. And we have the drivers here ready to go. Let's install the graphics driver. So that's APU driver. Just run the setup.exe. I'd
14:56
Speaker A
recommend clicking additional options, going minimum install, and then press install. I'll hit install here. Then we'll hit restart. Now that that's done, let's get the graphics control panel because that driver doesn't install it. In APU driver, we put our CC2 install XC file
15:14
Speaker A
here. We'll run and install that. You can hit show details if you want to see it's doing doing its thing. That's completed. Now, we should have the AMD control panel in our start menu. And here it is here. Let's install the rest
15:25
Speaker A
of the drivers. We'll install the Wi-Fi driver. Instructions said it was okay to do install, so we'll use that instead.
15:31
Speaker A
Go ahead and do the Bluetooth driver. We'll run install driver cmd. Let's grab our SD card driver. Run the setup. Might as well restart later.
15:40
Speaker A
Install the audio drivers. You have to right click the INF file and go install.
15:45
Speaker A
Operation completed successfully. Press okay. And then the other audio driver. Right click the INF file, install. Then press okay. Done with the USB stick.
15:54
Speaker A
Probably a good time to go ahead and restart the PC. Now, totally optional. I'd recommend a couple other tweaks though. If you're interested, search freaky GitHub. Go grab the ultimate pack. I'll scroll down and I'll use RWI to save time by copying that. Go to
16:08
Speaker A
PowerShell. Paste it in here. Press enter. I'm going to installers. Going to right click installers. Going to go open with choose another app. PowerShell always. Going to grab Steam. This will just save me some time.
16:19
Speaker A
I'd recommend custom resolution utility as you'll be able to run different resolutions that the Steam Deck won't let you. And I'm going to show you how to do that with Windows. I'm going to go back. I'm going to go to graphics and I
16:29
Speaker A
want AMD settings imported. So, I'm going to run AMD settings. going to press one and then press enter. I'm going to run MSI mode just in case that that driver didn't put my iGPU in MSI mode. One, then enter. We go to sounds,
16:41
Speaker A
sound settings, scroll all the way down to more sound settings. I don't like that the AMD uh audio driver does not give you loudness EQ. So, I'm going to get loudness EQ back by going to Windows, scrolling down, on 24 loudness
16:53
Speaker A
EQ, pressing enter. Now, we should have loudness EQ back. Be pretty handy to use if the speakers aren't loud enough or I just want to like make everything easy to hear. I'm going to go to advanced, and I don't recommend most of you doing
17:03
Speaker A
this. So, I'm actually going to uh disable Defender because I find Defender quite CPU toxic, especially for a device like this that doesn't have a very strong CPU.
17:12
Speaker A
Let's check out the AMD control panel. Setting should already be done. Notifications are off. Preferences are all off. Video Ed, I wouldn't touch this one. This one's quite buggy. And I'm going to talk to you about if you want
17:22
Speaker A
to do a custom resolution, how to do that. We got display here. Display, you may see very bright. The settings should have turned it off, but if it's on, I'd recommend disabling it. If you want to adjust your brightness, you will have a
17:33
Speaker A
slider down here. You guys don't see it on my screen right now because I'm using like a capture card right now, but you want to adjust brightness, you can just click here and do it that way. I highly
17:41
Speaker A
recommend turning on GPU scaling in the driver as a Steam Deck will be GPU scaling anyway. And if you want to run a different resolution, put it at uh full panel if you want it to scale to full
17:51
Speaker A
screen. And if you want it to be like a smaller screen, um, you know, with black bars, go center. also recommend doing if you have any other displays connected if you're going to use it to a TV or like a
18:00
Speaker A
computer monitor as well. Same thing with the GPU scaling there. As you can see, because the capture card is a native 1080p screen, just going to put this on full panel for now. If you use other displays, I'd recommend just
18:10
Speaker A
setting it to 8 bit as I find 12 bit a little bit buggy, which is the default on other displays. Let's head over to the graphics tab. To render the script, all the settings should be done for you.
18:18
Speaker A
Anti-lag is on, desync is forced off, performance enabled, override off. Now, leave anti- lag on. It makes a huge difference with the Steam Deck and it's measurable. Now, I actually, believe it or not, I like to use VSync quite a lot
18:30
Speaker A
for single player games. So, if that's the case for you, I'd recommend putting weight for vertical refresh to off unless application specifies. That way, in a game, you can turn it on and off in the game settings. And heading over to
18:41
Speaker A
system, there's really nothing to do here. Now, if you want to run a custom resolution, uh it's kind of weird the way the Steam Deck works. Uh with the iGPU, it'll always be GPU scaling, so I recommend forcing it, like I mentioned
18:51
Speaker A
before, in the driver. Go to scaled resolutions editor and just delete. These don't even get used anyway. Just delete all of them anyway. Delete all of them. Okay, these are the GPU scaled resolutions. Weirdly enough, even though the Steam Deck is GPU scale, um to use a
19:05
Speaker A
custom resolution on the actual display of the Steam Deck itself, you actually have to use custom resolution utility, which technically changes display scale.
19:13
Speaker A
So, here it here it is. Here it says active. You need to be very very careful. I've played around with a lot of stuff in here. over if I could add like variable refresh rate support.
19:22
Speaker A
Nothing really works, but you can change uh hertz and you can change the uh resolution itself. You need to be careful the way you go about it. So to do it, I would recommend you click this, go edit, go copy cuz the timings have to
19:35
Speaker A
be exactly the same. And if we wanted to add one, I would click add and then paste. Okay. And say I wanted, you know, some games don't support 1280 by 800 very well. Maybe you could go andhead and change this to, you know, 720, but
19:49
Speaker A
don't change any of the pixels at all, the pixel timings or anything. Just just leave it at that and then press okay.
19:56
Speaker A
All right. Now, say you wanted to u maybe use 30 hertz with VSYNC. If the game doesn't run very well, it's like a really really new title and you just want it to be like super smooth. You don't care about the input lag, you can
20:08
Speaker A
do that too as an example. So, I'm just going to delete this res. Come back to here. Go to edit, copy. It's already been copied from before. We'll go add.
20:15
Speaker A
We'll go paste. And this time I will just make it 30 30 Hz. Then press okay.
20:19
Speaker A
And then that's it. Press okay. Restart the PC. And that'll give you the option.
20:23
Speaker A
So that's how I've managed to be able to use different resolutions on the Steam Deck uh screen itself. But you have to be very very careful and keep the timings um that are exactly here. Don't change any of the timings. Just change
20:34
Speaker A
the res. Add a couple of resolutions that you'll want. And I found changing the refresh rate works okay too. Now, weirdly enough, I have sort of on the OLED version, I have screen flickering on anything under 45 Hz. So,
20:48
Speaker A
realistically on the Steam Deck, I just have a 60 Hz profile for some games that don't run well that will at least get 60 and I want to use VSYNC with on the LCD model, you'll probably be able to run
20:58
Speaker A
like a 30 Hz totally fine. Just don't mess around with the pixels at all. And you can add a couple of different resolutions if you want here, and they'll work with the GPU scaling. I would also recommend in ultimate in the
21:08
Speaker A
advanced folder to disable ulps ultra low power savings. Now, it's not recommended with hags, but you can't use hags on this version of Steam Deck. As you can see here, hags or hardware accelerated GPU scheduling isn't supported on this device. So, on this
21:22
Speaker A
device, I would recommend turning off ultra low power saving. Alternatively, you can that requires a restart.
21:27
Speaker A
Alternatively, you can actually do it in MSI After Burner. If you have a bit of a look there, it'll make you restart the PC. Now, what about secure and TPM? So, I'd press Windows key R for run at TPM.
21:38
Speaker A
MSC. Now, this should be enabled. If it isn't, you can get it enabled in your Steam Deck. And if it isn't ready for use, you can either clear it in the Steam Deck BIOS or you can clear TPM
21:46
Speaker A
here if it doesn't say ready for use. So, TPM's already taken care of. But what about secure boot? Windows key R and MS info 32. You scroll all the way down, you'll see that secure boot isn't on, and we need to get this sorted out.
21:57
Speaker A
So, it should say about the top here, secure boot state is off. We need to get this on for games with any cheat sheet.
22:01
Speaker A
To do this, we will need Rufus again. to go ahead and download the portable version. And there is a great repo on GitHub called Dex Secure Boot. You need to scroll down. We need to go to releases, grab the latest. This one
22:11
Speaker A
here, we need to grab the ISO file. Go ahead and download that. Now, if you're on the LCD, not the OLED. On the LCD, there is an issue with the audio driver not being assigned, but there is a
22:19
Speaker A
workound to get to the workound. You can go to issues and then down the bottom here, it says deck LCD audio drivers are unsigned. The workaround is going into registry. So, don't be alarmed. We've got to go to this location and we've got
22:31
Speaker A
to go to Yeah. and add upgraded system. So to do that, copy this, Ctrl + C, type T type Windows key R, type regedit and paste it here in the address bar. Okay.
22:40
Speaker A
And we need to add a reg keyword 32-bit value of upgraded system. So copy that, go new keyword 32-bit value, upgraded system. The value needs to be one. So double click on that, type one, press okay, and get that sorted before we
22:52
Speaker A
enable secure boot. Let's go to our downloads folder, plug in your USB stick, open Rufus, press no. Okay, we'll select the USB stick. Then we'll select the ISO image which is the the thing to enable let us enable secure boot. We
23:04
Speaker A
actually have to boot to it and press okay. And then the default value should be totally fine. So then you can go ahead and hit start and go ahead and make sure that you write it in DD image
23:13
Speaker A
mode only. Otherwise if you don't if you want to reuse this USB stick later to disable secure boot you won't be able to boot to it. So make sure that you make it right in DJ image mode. You will need
23:24
Speaker A
to disable secure boot later if you wanted to install Steam OS back on the Steam Deck or any kind of other like Linux image like Bazite or something like that is make sure that this is burnt in DD image mode otherwise it
23:36
Speaker A
won't boot to anything else other than you know something like Windows that's actually signed by the secure boot keys and press okay and wait for it to do its thing. That's finished. We'll hit close.
23:45
Speaker A
Now let's turn off the Steam Deck and then we can go to BIOS. get device by holding plus and then pressing the power button once while keep holding down plus we'll go to boot manager. So I'll press right and then
23:57
Speaker A
enter. Now I'm going to go to boot to the USB device. So EFI USB device and then I'll press enter.
24:05
Speaker A
It looks like this has only really been made for the Steam Deck layout. So it looks a little bit like compact here.
24:11
Speaker A
But what you actually need to do is you can start with the top one which is just you can use the arrow keys to go up and down. Uh the first one should say check secure boot. So, we'll check it. I'll
24:19
Speaker A
press enter. Okay. And then it says secure boot. No. Then press enter again. Okay. Now we can see everything. Now press down and press enter on enable secure boot. Then press okay. But then it says check boot status. But we're
24:29
Speaker A
pending a reboot. So we should do a reboot first. So what we'll do is we'll reboot. Now usually you would reboot back to the USB stick again and check it that way. But we should be able to check
24:38
Speaker A
if it's enabled in Windows. Now we're back in Windows. Press Windows key R. Type MS info32. Press okay or enter.
24:45
Speaker A
Scroll down. Now secure boot is on. So, we've successfully enabled secure boot and TPM is on. So, we have no limitations on any games that we can play. Now, if you want things to be convenient, do me a favor. Go to your
24:54
Speaker A
Steam settings. Turn off run Steam when my computer starts. Click on your start menu. If you scroll down, you should have a startup programs one. If you use wind sucks, right click here, go new shortcut. In the shortcut location, you
25:06
Speaker A
actually want to type this exactly and pause the video if you need to. Then, press next. Just call it Steam and press finish. Your Steam Deck will open in big picture mode while after Windows boots.
25:15
Speaker A
So, I'll show you that in real time. There we are automatically in big picture mode as soon as we boot, which is really convenient for a Steam Deck user. Let's say you wanted to disable secure boot and go reinstall Steam OS or
25:30
Speaker A
something else and it doesn't let you boot to the USB stick because we don't have that toggle option in BIOS. We're going to have to boot back to that USB stick that we made previously with that GitHub repo. So to do that, let's go to
25:40
Speaker A
BIOS again, holding the plus button down and then pressing the power button while continuing holding the plus button. We go to boot manager here and we've got our USB stick plugged in that we made previously. Uh we boot to UI USB device.
25:53
Speaker A
Press enter there. So we're booted to the USB. All you need to do is if we check boot status, we can see here that secure boot is on, but we saw that in Windows, right? We just go all the way down to the bottom to 11
26:04
Speaker A
here pressing the down arrow key and then press enter on disable secure boot. Then press enter again. Then go down to reboot. Just press enter on where it says 8 reboot. Booted back in. Go to MS Info32. As you can see, secure boot is
26:15
Speaker A
now off. Now we could successfully install Steam OS or anything else. It doesn't require it requires secure boot off. So that's the video. I absolutely love the Steam Deck. You can use it on the go while gaming, take it over, you
26:29
Speaker A
can use it like a portable laptop. Do whatever you want with it. You can use it with a docking station at home and actually use it as a desktop machine and and do just about anything you want on
26:39
Speaker A
it. You can install anything you want on it and play any game you want on it and it's such a just great device. And one day I cannot wait to see them do something like a Steam Deck half the
26:48
Speaker A
size that is a phone as well. That would be just absolute endgame for me. Hope you found the video useful. Appreciate you guys watching. See you in the next one. Like to support me. I have a one-on-one PC service to get your system
26:59
Speaker A
running the best possible. Consider donating. I stream on YouTube and Twitch. Come say hi. Don't forget all the goodies on GitHub. Like to get involved, check out Discord. If you're not subscribed, hit that subscribe button. A like and comment would really
27:10
Speaker A
help me. Thank you so much.
Topics:Steam DeckSteamOSWindows 11RufusUSB installSecure BootTPMdual bootfactory resetSteam Deck drivers

Get More with the SozAI App

Transcribe recordings, audio files, and YouTube videos — with AI summaries and speaker detection. 30 minutes free.

Or transcribe another YouTube video here →