Speaker A
Morning. We’re here to show you how to operate the Hammer with a couple of quick tips.
Learn how to safely and efficiently operate the Danuser Hammer with step-by-step tips for grappling, driving posts, and parking the machine.
Key Takeaways
- Always consult the owner’s manual for safety and maintenance before operation.
- Proper grapple positioning is crucial for loading and securing the post.
- Use float arms and hydraulics to drive the post smoothly to the desired depth.
- Stopping with the weight catch up high prevents the striker plate from falling out.
- Correct parking procedures ensure the machine is safely stored.
Summary
- Introduction to operating the Danuser Hammer with quick tips.
- Reference to the owner’s manual for safety, operation, and maintenance guidelines.
- Instructions on raising and tilting the machine to access the grapple.
- How to position and close the grapple around the post for loading.
- Steps to release the grapple and level the machine before driving the post.
- Guidance on using hydraulics and float arms to drive the post to the desired depth.
- Proper positioning of the post under the hammer and releasing the grapple.
- Tips on stopping at the correct depth with the weight catch up high to secure the striker plate.
- Instructions on parking the hammer safely by closing jaws and tucking the grapple under the machine.
Chapters
Full Transcript — Download SRT & Markdown
Speaker A
In the owner’s manual with every machine, it will go over all the safety and all the operation and maintenance that you might need.
Speaker A
Before we get started, Tyler will basically raise the machine up, tilt it away, so he can access and view the grapple.
Speaker A
He will then come up and grapple four inches from the top of the post.
Speaker A
As he closes the grapple and raises up, the post will load itself into the bottom of the Hammer.
Speaker A
Once it’s in the Hammer, and the post is on the ground, he can then release the grapple, level the machine, put your arms in float, activate the hydraulics, and drive your post to the desired depth.
Speaker A
As he raises the post, the post will tuck itself underneath the Hammer. Once it’s in the bottle opening and the bottom of the post is on the ground, he can then release the grapple.
Speaker A
Now he is leveling the post, coming down with a stopping point, put the arms in float, and he is ready to drive his post.
Speaker A
Once you reach your desired depth, stop with the weight catch up high and the hammer weight down low.
Speaker A
That will ensure the striker plate stays in the machine and does not fall out.
Speaker A
Go ahead and show them how to park it with the grapple, Tyler. When you’re finished with your hammer, you can close the jaws, lower the machine until the grapple touches the ground, and then shift to your left and tuck it under the machine and continue to go down.
Speaker A
Now you’re in a parking position.
Topics:Danuser Hammerpost drivergrapple operationhydraulicsmachine parkingpost installationequipment safetyheavy machinery operationconstruction toolsequipment maintenance
![[YTP]fr » Bonne nuit les tipeu — Transcript](https://i.ytimg.com/vi/_N4XunFaSnU/maxresdefault.jpg)
