Compares 7.3L Godzilla gas and 6.7L Power Stroke diesel Super Duty costs past 200,000 miles across nine factors, from fuel and maintenance to major repairs.
Key Takeaways
- The cheaper truck over 200,000 miles depends heavily on towing frequency and load.
- Diesel fuel systems and emissions components carry higher repair risk and cost when they fail.
- The 7.3 Godzilla's lifter/cam wear is a real weakness that can make its major repairs expensive.
- Strict adherence to maintenance schedules and fluid checks is essential for either engine to stay affordable.
What the video covers
- Opens with a typical 2022 F-250 Godzilla owner at 185,000 miles whose lifter and cam damage illustrates the cost risk of the simpler engine.
- Compares major failure costs: a 6.7 Power Stroke fuel system wipeout can reach $10,000-$15,000, while a 7.3 Godzilla long block ranges from about $8,000 to over $12,000.
- Fuel cost analysis: diesel costs more per gallon, but its better efficiency under load can offset the price gap, depending on how much the truck tows.
- Maintenance comparison: diesels need more oil, dual fuel filters, and DEF, so each service costs more than on a gas truck.
- Power Stroke fuel system risk: Bosch CP4.2 high-pressure pump failures can spread metal debris through rails, injectors, and tank, with recalls referenced for affected model years.
- Emissions system repairs (DPF, EGR, SCR/DEF) add cost especially for owners who run short trips.
- Godzilla lifter and camshaft wear, linked to oil pressure and flow issues, is presented as a notable weakness of the gas engine.
- Repair strategy: piecemeal fixes on high-mileage trucks often cost more than one thorough repair.
- Conclusion: the cheaper engine depends on towing habits and maintenance discipline rather than a universal answer.
Chapters
- 00:00Introduction and typical owner scenario
- 00:55Major repair cost comparison
- 01:57Fuel costs and fuel economy
- 03:09Routine maintenance and service costs
- 04:45Power Stroke fuel system failures and recalls
- 06:19Emissions system repairs: DPF, EGR, SCR
- 08:49Godzilla lifter and camshaft wear
- 12:33Repair strategy and final verdict
Full Transcript — Download SRT & Markdown
Speaker A
Picture a typical owner, a 2022 F 250 with the 7.3 L Godzilla gas engine right around 185,000 miles on the odometer.
Speaker A
He pulls a 12,000 lb fifth wheel several times a year and uses the truck for light hauling around town the rest of the time.
Speaker A
He bought gas over diesel because everyone told him diesel maintenance and diesel repairs will eat you alive past 100,000 miles.
Speaker A
Then on a cool autumn morning, a sharp metallic tick shows up right after startup. A misfire code trips on the dash and a shop pulls the valve cover to find worn lifters and cam lobe damage.
Speaker A
He picked the simpler engine to save money over the long haul. That's what makes this comparison sting.
Speaker A
Between the 7.3 L Godzilla gas V8 and the 6.7 L Power Stroke diesel in Ford Super Duty trucks, hitting 200,000 miles separates paper math [music] from real wallet pain.
Speaker A
One major fuel system failure on a 6.7 Power Stroke can run $10,000 to $15,000 when debris spreads, while a long block replacement on a 7.3 Godzilla can run from around $8,000 at factory long block pricing up past $12,000 at dealer rates
Speaker A
with labor. Today, I'm breaking down nine real cost and ownership factors across both engines past 200,000 miles for Super Duty trucks built from 2020 onward where the 7.3 Godzilla lives alongside the 6.7 Power Stroke.
Speaker A
Factor number five is where a quiet oil pressure habit hurts a pushrod engine people assume is bulletproof.
Speaker A
Factor number one is the real trap that decides which truck costs less by 200,000 miles and it connects straight back to our owner.
Speaker A
By the end, you'll have a straight answer on whether the 7.3 Godzilla or the 6.7 Power Stroke costs less after 200,000 miles.
Speaker A
Number nine is the most obvious place to start and it's where most buyers stop doing math.
Speaker A
Fuel cost at the pump and fuel economy over 200,000 miles. A gasoline engine burns regular unleaded in most normal driving, while a diesel engine burns ultra-low sulfur diesel, which almost always costs more per gallon across the country.
Speaker A
On top of price per gallon, a 7.3 L gas V8 drinks more fuel per mile than a 6.7 L diesel, especially when you put weight behind the truck.
Speaker A
A heavy gas V8 has larger displacement and lower thermal efficiency than a modern compression ignition diesel, so it uses more gallons to move the same load down the interstate.
Speaker A
Over 200,000 miles, even a modest [music] difference in miles per gallon paired with a price gap at the pump adds up to thousands of dollars in fuel alone.
Speaker A
To see why that matters for your wallet, picture a typical owner driving 25,000 miles a year with a mix of empty highway runs and heavy towing. Every extra gallon burned over 200,000 miles is money that never comes back.
Speaker A
Diesel fuel costs more at the pump, [music] yet the diesel engine often gets better fuel economy under load, so the two sides push and pull against each other depending on how much you actually tow.
Speaker A
If a truck spends 80% of its life unloaded, the gas engine's lower fuel price can narrow the gap. If it spends half its life pulling heavy trailers up long grades, fuel burn tilts hard toward the diesel.
Speaker A
Here's what you can check right now. Look at your fuel receipts or trip computer averages over a full tank or two and compare your cost per mile instead of guessing from a single fill-up.
Speaker A
Keep your tires aired to the specification on the driver's door jam sticker because soft tires add rolling resistance every single mile on both gas and diesel trucks. [music] Fuel tells you what it costs to feed the engine every week. It doesn't tell you what it
Speaker A
costs to keep the fluids clean and the emission gear working. Number eight catches owners who treat a heavy-duty diesel like a gas pickup when it comes to routine service. Routine fluid and filter bills over 200,000 miles.
Speaker A
A 7.3 L Godzilla holds 8 qt of engine oil with the filter using 5W30 oil meeting Ford specification. And it has no diesel fuel filter set, no diesel exhaust fluid tank, and no particulate filter to worry about. A 6.7
Speaker A
L Power Stroke holds more oil, uses dual fuel filters, takes diesel exhaust fluid for its selective catalytic reduction system, and carries larger fluid capacities across the board. Each individual service on a diesel usually costs more in parts and fluids than the
Speaker A
equivalent service on a gas truck. That difference happens because diesel combustion creates more soot and higher cylinder pressures, and the exhaust system uses urea-based fluid to cut oxides of nitrogen. [music] Over 200,000 miles, doing 10, 15, or 20 service
Speaker A
cycles means those extra quarts, extra filters, and extra jugs of fluid stack up every year. Maintenance guides for the 6.7 Power Stroke commonly put routine annual care around $775 to over $1,000 depending on mileage and whether you do the work yourself or pay a shop.
Speaker A
Here's the practical move. Open your owner's manual maintenance schedule for your exact model year and engine and separate normal duty from severe duty.
Speaker A
[music] If you tow heavy, run in dusty conditions, or idle a lot, severe duty intervals apply sooner. And doing routine filter and fluid checks yourself on level ground can cut labor bills dramatically. Routine upkeep is predictable money. The next item is what
Speaker A
happens when a diesel fuel system turns a single pump problem into a whole system wipeout.
Speaker A
Number seven is the repair bill every 6.7 Power Stroke owner dreads past warranty. High-pressure fuel pump failure and fuel system contamination.
Speaker A
From 2011 through 2025, 6.7 L Power Stroke trucks used the Bosch CP4.2 high-pressure fuel pump.
Speaker A
That pump takes fuel from the supply side and raises pressure to feed the common rail and injectors. When internal wear or fuel contamination happens inside that pump, it can shed fine metal debris into the pressurized fuel circuit.
Speaker A
Once metal gets past the pump, it can score injectors, damage fuel rails and lines, and even work its way back into the return circuit and fuel tank.
Speaker A
The financial hit is what separates a normal repair from a nightmare. A clean repair caught early stays limited to the failed part and diagnostics. Once contamination spreads through the rails, injectors, lines, and tank, parts and labor commonly run
Speaker A
around $10,000 to $15,000. [music] Ford has also issued recalls on specific model years, including recall 24S78, also tracked as NHTSA, recall 24V957 covering certain 2020 to 2022 Super Duty trucks for fuel pump issues, and later recalls such as 26S17
Speaker A
or NHTSA 26V158 addressed software and repair follow-ups. Picture a typical owner out on a family trip pulling a travel trailer when the truck cranks long, stumbles, or sets a fuel rail pressure fault. If metal debris is already circulating, you aren't just fixing a
Speaker A
pump anymore. You're decontaminating or replacing a whole fuel system. Here's what you should do. Never ignore a water in fuel warning or let fuel filters run past their interval and drain water traps as directed in your owner's manual. If you have a 2020 to 2022
Speaker A
truck, check your vehicle identification number on Ford's recall lookup for recall 24S78 and any related campaign.
Speaker A
Some owners also look into filtration upgrades or pump conversions, though you should weigh warranty impact and parts quality carefully before changing factory hardware. A fuel system failure hits hard and fast. The next expense builds more quietly in the exhaust
Speaker A
stream. Number six affects 6.7 Power Stroke owners who drive short trips or let emission faults linger.
Speaker A
Diesel exhaust fluid, particulate filter, and exhaust gas recirculation repairs. Modern 6.7 L Power Stroke diesels rely on exhaust to meet emissions rules.
Speaker A
Exhaust gas recirculation routes a portion of cooled exhaust gas back into the intake to lower combustion temperatures and reduce oxides of nitrogen.
Speaker A
A diesel particulate filter traps soot from exhaust gas and burns it off during regeneration cycles, while selective catalytic reduction injects diesel exhaust fluid into the exhaust stream to convert oxides of nitrogen.
Speaker A
When a truck runs mostly short trips or never gets hot enough long enough to complete regeneration cycles, soot loads up in the particulate filter, sensors see pressure differences or temperature faults, and warning messages or reduced power modes can appear.
Speaker A
Professional particulate filter cleaning often runs around $500 to $1,000, while replacing a particulate filter or selective catalytic reduction assembly and associated sensors can climb [music] to $3,000, $4,000 or more depending on parts and labor.
Speaker A
Here's how to protect yourself. If your truck starts a regeneration or tells you to keep driving to complete one, give it a steady highway run when safe [music] so exhaust temperatures stay high enough to finish the burn.
Speaker A
Keep quality diesel exhaust fluid topped off. Watch for warning messages early instead of driving around with active exhaust faults, and use a basic OBD II scan tool to read trouble codes before small sensor or soot issues turn into
Speaker A
major assemblies. Emission hardware is unique to the diesel. Now, let's look at the mechanical [music] weak spot that has surprised plenty of 7.3 Godzilla owners.
Speaker A
Number five is the one I teased earlier, and it's an honest Ford flaw on the 7.3 L Godzilla, lifter and camshaft wear.
Speaker A
The 7.3 L Godzilla is an overhead valve pushrod gasoline V8 [music] introduced for the 2020 model year in Super Duty trucks. Pushrod engines are prized [music] for simplicity because the camshaft sits in the block and actuates valves through lifters and pushrods
Speaker A
rather than overhead cams and timing chains. Yet, starting in the era and continuing [music] across later model years, owners, fleets, and technicians have reported roller lifter and camshaft lobe wear on some 7.3 engines, leading to ticking noises, misfire codes, and in severe cases, full
Speaker A
engine replacement. Ford has issued technical service bulletins addressing ticking and misfire repairs on these [music] engines, such as bulletin 25-2200 for 2020 to 2025 chassis applications, and [music] NHTSA has reviewed complaints tied to lifter and camshaft failures. Why does a simple pushrod
Speaker A
design wear a lifter or cam lobe? Engine oil has two jobs. [music] It lubricates moving surfaces and it carries heat away. Keep those two jobs in mind because they come back again and again in this video. Inside a pushrod
Speaker A
valve [music] train, a roller lifter rides directly against a spinning cam lobe under heavy spring load and heat.
Speaker A
If oil flow is thin, dirty, or delayed during low-speed operation or long idles, [music] or if a roller bearing binds or skids on the lobe, metal rubs on metal and sheds debris through the oil. [music] Once debris circulates,
Speaker A
bearings and cam lobes pay the price fast. When a 7.3 needs a long block replacement, parts and labor [music] can easily run from around $8,000 at factory long block pricing up past $12,000 at dealer labor rates, sometimes more
Speaker A
[music] depending on shop rates and whether any goodwill assistance applies. Picture a typical owner with a 2021 F-250 who hears [music] a rhythmic tick from the engine bay that gets faster with engine speed, followed by a rough idle or misfire code. Catching noise
Speaker A
early and checking oil condition is far cheaper than waiting until metal shreds the valve train. Here's what you can do.
Speaker A
Listen closely to your engine at idle with the hood open. Occasionally, check your oil level on the dipstick, and if you hear abnormal ticking or get a misfire code, have a qualified [music] technician diagnose it promptly rather than just clearing the code. Also, check
Speaker A
your vehicle identification number for [music] any open recalls or service bulletins tied to your model year.
Speaker A
That valve train hits the gas trucks biggest selling [music] point, which is mechanical simplicity. Next up is a system both trucks share in heavy duty use where heat and load test everything.
Speaker A
Number four applies to every 7.3 and 6.7 owner who tows or hauls heavy. [music] Transmission and drivetrain heat stress past 200,000 miles.
Speaker A
Super duty trucks with the 7.3 Godzilla or 6.7 Power Stroke use 10-speed automatic transmissions such as the 10R140 [music] along with transfer cases and heavy axles. When you pull a heavy trailer up a steep grade or through hot
Speaker A
weather, torque converter slip and heavy loads generate intense heat in the transmission fluid and axles.
Speaker A
Transmission fluid does more than shift gears. It applies clutches, transmits hydraulic pressure, and carries heat away from internal parts. If fluid overheats repeatedly or goes far past its service interval, additives break down, friction material wears faster, and shift quality degrades. Replacing or
Speaker A
rebuilding [music] a heavy duty automatic transmission or fixing internal clutch and valve body damage can run several thousand dollars, easily $4,000 [music] to $7,000 or more depending on whether you go with a remanufactured unit, dealer unit, or independent rebuild. Here's how to drive
Speaker A
smarter when towing. Use tow haul mode when pulling a trailer [music] or carrying a heavy load so the transmission shifts at points that manage heat and keep engine [music] speed in a working range instead of lugging in too high a gear. Watch your
Speaker A
transmission temperature gauge on long climbs and stay within the gross combined weight rating and payload limits listed on your door jam sticker and owner's manual.
Speaker A
Before we get to the top [music] three, notice something about what we've covered so far. Neither engine is immune to expensive failures past 200,000 miles. The 6.7 carries higher fuel, filter, emissions, and fuel system stakes, while the 7.3 carries higher
Speaker A
fuel burn and real valve train and drivetrain risk when worked hard. The top three are where the real ownership math past 200,000 miles comes into focus. And one of them is something conscientious owners do because they think it's protecting their truck. If
Speaker A
you want your super duty running strong past 200,000 miles without getting blindsided by five figure bills, subscribe now so the next one of these reaches you before a repair bill does.
Speaker A
Number three is a habit plenty [music] of careful owners fall into. Stretching oil change intervals or relying only on the dash monitor instead of actual usage. Both the 7.3 Godzilla and the 6.7 Powerstroke [music] have oil life monitoring logic and owners often assume
Speaker A
waiting until the dash tells them to change the oil is always the smart thrifty choice. [music] Remember our two jobs for oil, lubricating and carrying heat away. Over thousands of miles heat shears viscosity, fuel dilution or soot builds up and additive packages get used
Speaker A
up. Even if the dash still shows life remaining, heavy towing, dusty roads, short trips or extended idling wear oil faster than easy highway miles. [music] In a 7.3 dirty or degraded oil doesn't help push rod lifters or cam lobes stay
Speaker A
protected. In a 6.7 [music] soot and heat load up the oil and stress turbocharger bearings and cooling paths.
Speaker A
Paying for an extra oil and filter change costs a modest amount compared to an engine or turbo repair that runs thousands of dollars. Here's what you should do. Check the oil dipstick regularly on level ground after the engine has been off for a few minutes.
Speaker A
Inspect the oil's color and smell and shorten your interval when you tow heavy, idle a lot or drive in tough conditions. Oil condition is under your control every single week.
Speaker A
The next item is about what happens when parts wear out and you have to choose how to fix them.
Speaker A
Number two is the repair strategy trap past 200,000 miles. Chasing piecemeal fixes or buying cheap parts on a high mileage truck.
Speaker A
Once a truck crosses 200,000 miles, wear rarely shows up on just one isolated piece.
Speaker A
On a 6.7 Powerstroke, weak fuel supply pressure, [music] old fuel filters, a sticky exhaust valve, or a tired turbocharger can interact with neighboring parts.
Speaker A
On a 7.3 Godzilla, worn valve train parts, aging sensors, or tired cooling components can leave metal debris or heat stress behind.
Speaker A
Putting in a bargain part or replacing only one piece while ignoring the root cause can lead to a repeat failure and a second labor bill.
Speaker A
Picture a typical owner who puts in a cheap replacement sensor [music] or skips inspecting a fuel or oil system after a fault, only to watch the exact same problem come back a few months later. Two labor bills on a heavy-duty
Speaker A
truck are always worse than one thorough repair done right the first time. Here's what you can check yourself.
Speaker A
Keep a simple maintenance log of every fluid, filter, and repair with the date and mileage.
Speaker A
Pull codes with an OBD II scanner whenever a warning light appears, [music] and ask a trusted shop what caused the failure before approving a repair.
Speaker A
Now we arrive at number one. The real deciding factor for which truck costs less after 200,000 miles.
Speaker A
Total cost of ownership matched [music] to how you actually use the truck, not the sticker price or fuel price alone.
Speaker A
Remember our owner. He bought a 2022 F 250 with the 7.3 Godzilla at 185,000 miles, [music] towing a 12,000 lb fifth wheel several times a year because he wanted to avoid diesel repair [music] bills. Then a lifter and cam issue hit
Speaker A
him right when he thought he had chosen the cheaper, simpler truck. Here's why that happens in real life.
Speaker A
People compare the 7.3 Godzilla and the 6.7 Powerstroke by looking at one line item at a time. A gas buyer looks at a lower purchase price, cheaper oil changes, no diesel exhaust fluid, and no high-pressure diesel pump, and assumes
Speaker A
gas always costs less. A diesel buyer looks at better towing mileage and lower engine speed on the highway [music] and assumes diesel always wins on a heavy hauler.
Speaker A
Past 200,000 miles, neither assumption holds up on its own. If a 6.7 power stroke suffers a contaminated high-pressure fuel pump failure at $10,000 to $15,000 or a major emissions assembly failure at $3,000 to $4,000 or more, that wipes out
Speaker A
years of fuel savings in one afternoon. On the flip side, [music] if a 7.3 Godzilla suffers a lifter and camshaft failure requiring a long block at $8,000 to over $12,000 or burns extra fuel across 200,000 miles of heavy towing, the supposed gas
Speaker A
savings can disappear [music] just as fast. The real climax past 200,000 miles isn't a magic engine. It's that a high-mileage heavy-duty truck with a catastrophic engine, fuel, or emissions failure can cost more to fix than the truck is worth
Speaker A
to you. [music] And the engine that costs less is the one whose weak points fit your driving and maintenance discipline. If you tow heavy often and maintain fuel, emissions, and oil strictly, the 6.7's efficiency and pulling strength [music] can pay off
Speaker A
over high mileage. If you haul moderate loads, drive fewer miles per year, and want simpler systems without diesel emissions gear, [music] the 7.3 can cost less, provided you stay on top of oil and valve [music] train health.
Speaker A
So, which truck costs less after 200,000 miles? Here's my straight answer. Neither engine automatically wins past [music] 200,000 miles because a single major failure on either one can cost $8,000 to $15,000.
Speaker A
So, the cheaper truck is the one matched to your actual towing load and maintenance habits.
Speaker A
Quick recap. Compare total cost per mile including fuel. Watch diesel routine fluids and filters. [music] Guard against 6.7 fuel system contamination.
Speaker A
Stay ahead of diesel emissions faults. Listen for 7.3 lifter and cam wear. Manage transmission heat when towing.
Speaker A
[music] Don't stretch oil intervals on tough duty. Avoid piecemeal repeat repairs [music] and judge total cost by how you really use the truck.
Topics:7.3 Godzilla6.7 Power StrokeFord Super Dutyhigh mileagediesel vs gasfuel system repairtruck maintenance costsF-250 ownership











