TIPS MUDAH MEMBUAT BONSAI KELAPA DARI AWAL SAMPAI JADI BAGUS /Easy way make coconut bonsai

Learn easy step-by-step techniques to create a beautiful coconut bonsai from seed to soil transfer, including rose cutting and root care tips.

Key Takeaways

Maintaining proper water level and cleanliness is crucial for healthy coconut bonsai growth.
Rose cutting is a one-time essential step to shape the bonsai and control leaf growth.
Drying the cut rose in shade with moisture prevents shell damage and promotes healing.
Water medium duration of 3-6 months helps develop strong roots before transferring to soil.
Keeping the bonsai shaded after varnishing protects the shell from cracking due to heat.

What the video covers

Introduction with coffee greeting and overview of coconut bonsai growth process.
Using mineral water bottles with holes to control water level and prevent shoots from submerging.
Guidance on when and how to replace or top up water to maintain cleanliness and prevent mosquito larvae.
Performing a rose cut at about one month old to control leaf growth and improve bonsai shape.
Proper drying techniques after rose cutting, emphasizing shade and moisture to avoid shell cracking.
Instructions on pulling shoots during withdrawal phase after about one week when shoots start drying.
Advice on removing dried or blackened rose cuttings to maintain plant health.
Recommended duration in water medium is 3 to 6 months for optimal root development before soil transfer.
Using wet fabric to keep roots moist and stimulate further root growth after transfer to soil.
Final tips on varnishing the shell and keeping the bonsai in shade to prevent cracking and damage.

Chapters

How often should the water be replaced when growing coconut bonsai in water medium?

Water should be replaced if it becomes dirty or contains mosquito larvae. If the water is still clean but reduced, simply add more water without replacing it.

When is the best time to perform the rose cut on the coconut bonsai?

The rose cut should be done once when the bonsai is about one month old and shoots have started to grow leaves but still have buds.

How long should the coconut bonsai stay in the water medium before transferring to soil?

The bonsai should stay in the water medium for about 3 to 6 months to allow sufficient root growth before transferring to soil.

Full Transcript — Download SRT & Markdown

Speaker A

Hello, good morning friends. Back again with my coffee greetings. No sugar, a cup of coffee, a million inspirations, and a million brothers. Okay friends, this morning I will show you step by step growth from coconut bonsai friends and techniques for how to cut roses

Speaker A

and disposal from the rest of the rose cut process after incising roses. After, so how? So the initial process of making coconut bonsai for water media, friends have to provide mineral water bottles like this, then filled with holes

Speaker A

so that the water doesn't pass the limit to the top. So it ends here. The water will spill. Besides functioning for this water limit, it also serves so that the shoots are not too submerged in water. Then put it like this.

Speaker A

Try the seeds that friends use already growing shoots like this. Yes, if you can leave the coir at the end of the shoot, the goal is to absorb water. The first stage like this is just laid. So for the water, does it need to be replaced or not?

Speaker A

So in my experience, if the water is dirty, it can be replaced. If the water is filled with mosquito larvae, it is usually replaced. But if the water is still clean and the water is reduced, friends just need to add

Speaker A

do not need to be replaced. The water will be absorbed upward so that the water will decrease. Okay, for the first step, I hope my friends understand. For step 2, we will find a model like this, friends, like this

Speaker A

until this row. Huh, in the second cuttings, he will have started to grow shoots. I mean growing leaves but still buds like this. At this stage, friends do a rose cut. Usually, his age is at 1 month of age.

Speaker A

So do a rose cut like this. This is the petal first split. So with a cut of a rose, the leaves won't stick out high. So the smaller, the friends can see, the better because the process when pulling it

Speaker A

it will get easier later. So this rose cut is done only once. Just once, cut the rose. After cutting the rose, we will show the process. After cutting the roses, friends, put this in the shade. Do not dry in the sun, friends.

Speaker A

Do not need to be dried in the sun, just put it in the shade because if it's in the sun, it will be risky broken shell, friends. But if friends want to dry in the sun, it can also be approximately 5 minutes

Speaker A

but the shell is wrapped with a wet cloth. By chance, I put it in the shade. I don't need a wet cloth, but if friends put it in the heat, friends have to shut down with a damp cloth, like this. Be sure

Speaker A

the shell is always moist. Well, there are also some cases who asked why shoots face down. Can you face up? Later, he will bend, friends, according to the process. So it's the same in the rose. So for the shoot down, he will

Speaker A

turn upwards along growth too. Huh, it's okay to set up down first because the seeds are different. So in this process, usually prone to broken, so be careful when doing it like this more or less. Well, for the stage

Speaker A

cut a rose already for the next step. This is it. After cutting the roses, after cutting the roses, what to do? Friends have to do withdrawal. Withdrawal like this, pull him up. Can't be pulled anymore, pull up to the base.

Speaker A

Well, this has grown before to the bottom. We pull him to lower limit. When to start withdrawals? Usually in time one week, usually he has grown and we can pull him up after feeling it has started to dry.

Speaker A

Because it's starting to dry out. This is actually so friends can start cutting this. The rest of the cut rose, we'll see the rest of the sayt rose. So this can be cut. It's already starting to dry the cut

Speaker A

when it starts to dry up and doesn't grow anymore. So the process long enough. Yes, even friends has many unkempt materials, it would also be useless. Here he has started to blacken, usually omitted. Well, after later cut a rose

Speaker A

the remaining step of removing the incised rose, the rest cut the rose. The next step is staying perform routine cuts only. Well, how long in the water medium? Questions that often arise. So for the water medium, this is usually

Speaker A

3 to 6 months, but if you want any longer, that's okay because usually in the water medium, usually for program its roots for faster length. Well, usually here friends must be careful so that it shoots not broken. Well, like this

Speaker A

after cutting the roses, so it can be cleaned again. So don't go too down until here, just so it shoots the young one does not curve downward. We wait for it to be a little yellow or older, then we clean

Speaker A

just like that. Root growth is good enough, friends. So it is put again. So for the roots of friends, you can help dressing with fabric wet so that the entire root get water. Huh, well after that he will grow like this.

Speaker A

Here are two coconuts which are already finished sauyat roses and already thrown away, and this leaves about 4 and there are 3. Then the process, friends, just do it incision just in this filter. When was the incision done?

Speaker A

The incision is done when the filter started to grow already getting high. It can be cut. Don't get too past. Then when transfer to soil media? Well, for transfer to the soil medium, like I said, it depends on friends.

Speaker A

For example, if this roots have grown like this, friends want to move to land media, this can be, friends. If friends want only 3 because I want a lot of roots, so I will program longer in water media.

Speaker A

So that's actually the point programming in water media for the root growth process. So after the root is enough, friends can move it to the soil media. Well, this is one example after us move to the soil medium.

Speaker A

This is it already moved, but after moving, me want to add more roots, so I use it moss to stimulate root growth. That's a little bit of the process step by step manufacture of coconut bonsai from from beginning to age more or less

Speaker A

2.5 months, friends, until the end will be a beautiful coconut, friends. So for shell, friends, friends can be varnished, even though it has been varnished, friends must keep it in the shade because there is still a lot of water in the shell.

Speaker A

Contains water, so if exposed to heat or the heat, he will evaporate and can break shells like this. For example, she experienced cracking from the heat. So this can survive because I glue using glue g so that nothing like this could happen.

Speaker A

Better not in the sun, friends. Okay, that's all the video this time. May be useful. Please comment in the comments column if you have any questions and don't forget to like and share with friends Kalaian so your friends know

Speaker A

how to step by step make coconut bonsai. Thank you. Greetings unsweetened coffee.

Topics:coconut bonsaibonsai tutorialbonsai coconutbonsai water mediumrose cutting bonsaibonsai root carebonsai soil transferbonsai maintenancebonsai growth tipsbonsai step by step

Get More with the SozAI App

Transcribe recordings, audio files, and YouTube videos — with AI summaries and speaker detection. 30 minutes free.

App Store Google Play

Or transcribe another YouTube video here →

Free tools: TXT to SRT · SRT Validator · Merge SRT · Subtitle to Text · All tools